Old
Item |
New
Item |
Description |
Product
Sheet |
Tech
Manual |
| DYN1-10724-000-0-12 |
|
Replaced by DPG Series |
f-24405
f-24406 |
f-24419 |
| DYN1-10724-000-0-24 |
|
Replaced by DPG Series |
| DYN1-10724-001-0-12 |
8270-1020 |
Replaced by DPG Series |
| DYN1-10726-000-0-12 |
8270-1023 |
Replaced by DPG Series |
| DYN1-10726-000-0-24 |
|
Replaced by DPG Series |
| DYN1-10704-000-0-12 |
8270-1008 |
Pickup frequency operating range
at maximum engine RPM - 2500 to 5000 Hz |
| DYN1-10704-000-0-24 |
8270-1050 |
Pickup frequency operating range
at maximum engine RPM - 2500 to 5000 Hz |
| DYN1-10704-002-0-12 |
8270-1048 |
Pickup frequency operating range
at maximum engine RPM - 2500 to 5000 Hz. CE marked |
| DYN1-10704-002-0-24 |
8270-1055 |
Pickup frequency operating range
at maximum engine RPM - 2500 to 5000 Hz. CE marked |
| DYN1-10706-000-0-12 |
|
Replaced by DPG-2101-001 series |
| DYN1-10706-000-0-24 |
|
Replaced by DPG-2101-001 series |
| DYN1-10706-001-0-12 |
|
Replaced by DPG-2101-001 series |
| DYN1-10706-001-0-24 |
|
Replaced by DPG-2101-001 series |
| DYN1-10714-000-0-12 |
8270-1045 |
Replaced by DPG-2101-001 series. |
| DYN1-10714-000-0-24 |
|
Replaced by DPG-2101-001 series |
| DYN1-10716-000-0-12 |
|
Pickup frequency operating range
at maximum engine RPM - 5000 to 9500 Hz |
| DYN1-10716-000-0-24 |
8270-1087 |
Pickup frequency operating range
at maximum engine RPM - 5000 to 9500 Hz |
| DYN1-10752-000-0-12 |
Replaced by DPG Series |
For these
controllers, separate circuits allow adjustments of proportional, integral and derivative
values. These parameters all work together to provide a control that results in fast and
stable engine response to load changes while maintaining precise speed regulation of
diesel, gasoline or natural gas engines.
SPECIFICATIONS
Operating Voltage: 12 or 24 volts ± 20%
Steady State Speed Band: ± 0.25%
Ambient Operating Temperature: -40°F to +180°F (-40°C to +85°C)
Temperature Stability: Better than ± 0.5% over temperatures of -40°F to +167°F (-40°C
to +75°C)
Mechanical Vibration: Withstands the following vibration without failure or degraded
performance: 0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz; 0.02 inch
double amplitude at 30 to 48 Hz; 2.5 G's at 48 to 70 Hz.
Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.)
Actuator Compatibility: DYNA 2000, DYNA 2500, DYNA 7000 and Power Flow 38
CE Rated (available) |
f-24407 |
f-24427 |
| DYN1-10752-000-0-24 |
Replaced by DPG Series |
| DYN1-10752-001-0-24 |
Replaced by DPG Series |
| DYN1-10753-000-0-12 |
Replaced by DPG Series |
| DYN1-10753-000-0-24 |
Replaced by DPG Series |
| DYN1-10753-001-0-24 |
Replaced by DPG Series |
| DYN1-10754-000-0-12 |
8270-1015 |
| DYN1-10754-000-0-24 |
8270-1038 |
| DYN1-10754-001-0-24 |
8270-1018 |
| DYN1-10754-001-0-24 |
8270-1036 |
| DYN1-10756-000-0-12 |
8270-1051 |
| DYN1-10756-000-0-24 |
Replaced by DPG Series |
| DYN1-10756-001-0-12 |
Replaced by DPG Series |
| DYN1-10756-001-0-24 |
Replaced by DPG Series |
| DYN1-10744-000-0-12 |
8270-1027 |
PC Board controller.This is a
fully capable, conformally coated PCB controller for spark-ignited applications. This
controller is intended to be mounted in an enclosure and is an excellent choice for
customers who have no need for a potted and enclosed controller.
SPECIFICATIONS
Speed Range: 250 - 9500 Hz
Input: 2.5 Vrms minimum speed signal
Operating Voltage: 12 VDC or 24 VDC
Maximum Stall Current: 5.4 amps @ 12 VDC; 3.0 amps @ 24 VDC
Maximum Linear Output Travel: .80 in (20.3mm)
Maximum Force Energized: 6.5 lbs. or 2950 grams
Maximum Work Output: 0.25 ft.-lbs. or 0.33 joules |
dyna
264 |
dyna
203 |
| DYN1-10749-000-0-12 |
8270-1042 |
Off-Highway controller.
Specifically designed to cover a wide range of control requirements for stationary and
off-highway engines, this controller has three selectable speeds - Low, Mid and High plus
a unique gain change feature that automatically increases the gain for optimum response
when Mid and High speeds are selected. It can be used in either diesel or spark-ignited
engines.
SPECIFICATIONS
Operating Voltage: 12 or 24 volts, ± 20%
Ambient Operating Temperature: -40°F to +180°F (-40° C to +85°C)
Mechanical Vibration: 5-500 Hz, curve L, per MIL-STD-810
Weight: 826 grams (1.82 lbs.)
Sealing: Oil, water and dust tight
Connections: #18 gauge leads with minimum length of 10 inches (25.4 cm)
Steady State Speed Band: ± 0.25%
Actuator Compatibility: DYNA 2000, DYNA 2500
Magnetic Pickup Frequency Range: 2500 - 5000 Hz
CE Rated |
dyna
230 |
dyna
260 |
|
|
|
|
|
