DYNA 8x00 Systems

  Note: Documents are not under Woodward engineering control and are provided for historical reference only.

DYNA 8000 Series Actuators

The DYNA 8000 governor is a simple, reliable, low cost, 0.9 ft. lb., all-electric governor for precise isochronous or droop speed control of medium sized engines, depending on the type of fuel system used.
SPECIFICATIONS
Speed Range: 250 - 9500 Hz
Input: 2.5 Vrms minimum speed signal
Operating Voltage: 12 VDC or 24 VDC
Maximum Stall Current: 12.5 amps @ 12 VDC;
                           13 amps @ 24 VDC
Full Output Travel: 35°
Maximum Work Output: 1.0 ft. lbs.
Maximum Torque Output: 1.2 lb.ft.

For more information please consult product sheets f-22030 and f-23441, and manuals f-22171 and f-23721

  DYNA 8200 Series Actuators

The DYNA 8200 governor is a simple, low cost, 2.2 ft. lb., all electric governor for precise isochronous or droop speed control of medium sized diesel and spark ignited engines, depending on the type of fuel system used. This unit has dual output shafts for clockwise and counterclockwise rotation.
SPECIFICATIONS
Speed Range: 250 - 9500 Hz
Input: 2.5 Vrms minimum speed signal
Operating Voltage: 12 VDC or 24 VDC
Maximum Stall Current: 14.75 amps @ 12 VDC; 14 amps @ 24 VDC
Full Output Travel: 45°
Maximum Work Output: 2.2 ft. lbs.
Maximum Torque Output: 3.0 lb.ft

For more information please consult product sheets f-22030 and f-23441, and manuals f-22171 and f-23721

 DYNA 8400 Series Actuator

DYNA 8x00 Series Controllers

Panel Mounted Controllers for use with DYNA 8000/8200/8400 Actuators

For more information consult product sheets f-22030 and f-23441, and manuals f-22171 and f-23721.

DYNA 8x00 Series Smoke-Limit Controllers

Panel Mounted Controllers for use with DYNA 8000/8200/8400 Actuators

For more information consult product sheets f-24693 and dyna 129, and
manuals f-23721 and dyna 142.