Item |
Name |
Description |
Clevis |
|
|
DYNK-218-1 |
Clevis |
For use with 1/4-20 rod end bearings |
DYNK-218-2 |
Clevis |
For use with #10/32 rod end bearings |
Electronic Speed Switches |
|
|
| DYN3-60030 |
|
|
| DYNZ-60010 |
Electronic Speed Switch, 8 to 40 Vdc input,
overspeed latching SW2 |
Product Sheet f-22360
Manual f-23371 |
| DYNZ-60012 |
Electronic Speed Switch, 59 to 88 Vdc input,
overspeed non-latching SW2 |
Product Sheet f-22360
Manual f-23371 |
| DYNZ-60013 |
Electronic Speed Switch, 8 to 40 Vdc input,
overspeed non-latching SW2 |
Product Sheet f-22360
Manual f-23371 |
| Connectors |
|
|
DYNZ-46-01 |
Mating electrical connectors |
Straight, Mates with DYN1 Control Box |
DYNZ-46-02 |
Harness |
90 degrees, Mates with DYN1 Control Box |
DYNZ-46-13 |
Harness |
Straight, Mates with Magnetic Pickup |
DYNZ-46-14 |
Harness |
90 degrees, Mates with Magnetic Pickup |
Foot Pedals and Harness |
|
DYNK-100 |
Foot Pedal Harness |
Length: 10.0 Ft. (3.00 m) |
DYNK-100-2 |
Foot Pedal Harness |
Length: 34.0 Ft. (10.30 m) |
DYNS-10025 |
Foot Pedals |
Foot Pedal Assembly with 5K potentiometer and
full length pedal (3 pin connector) |
Harnesses |
|
|
DYNK-123-1 |
Harness |
Length: 12.0 Ft. (3.60 m) |
DYNK-123-2 |
Harness |
Length: 25.0 Ft. (7.6 m) |
DYNK-123-5 |
Harness |
Length: 9.0 Ft. (2.8 m) |
DYNK-327-5 |
Harness |
9' (2.7m) |
DYNK-327-6 |
Harness |
15' (4.6m) |
DYNK-44-1 |
Magnetic Pickup harness |
Length: 6.0 Ft. (1.80 m) |
DYNK-44-10 |
Magnetic Pickup harness |
Length: 20.0 Ft. (6.00 m) |
DYNK-44-2 |
Magnetic Pickup harness |
Length: 12.0 Ft. (3.65 m) |
DYNK-44-3 |
Magnetic Pickup harness |
Length: 10.0 Ft. (3.00 m) |
DYNK-44-4 |
Magnetic Pickup harness |
Length: 15.0 Ft. (4.50 m) |
DYNK-51-0 |
Harness |
Pickup Leads: 23.0 Ft. (7.30 m) Power and
Remote Potentiometer Leads: 23.0 Ft. (7.30 m) |
DYNK-51-3 |
Harness |
Pickup Leads: 9.6 Ft. (3.00 m) Power and
Remote Potentiometer Leads: 9.6 Ft. (3.00 m) |
DYNK-61-0 |
Harness |
Length: 12.0 Ft. (3.65 m) |
DYNK-61-2 |
Harness |
Length: 35.0 Ft. (10.60 m) |
DYNK-61-21 |
Harness |
Length: 11.7 Ft. (3.65 m) |
DYNK-61-22 |
Harness |
Length: 25.0 Ft. (7.60 m) |
DYNZ-101-0 |
Harness |
Pickup Leads:
11.90 Ft. (3.65 m) Power and Remote Potentiometer Leads: 11.90 Ft. (3.65 m) |
DYNZ-101-010 |
Harness |
Pickup Leads: 11.90 Ft. (3.65 m) Power and Remote Potentiometer Leads: 24.90 Ft.
(7.60 m) |
DYNZ-101-040 |
Harness |
Pickup Leads:
11.90 Ft. (3.65 m) Power and Remote
Potentiometer Leads: 34.70 Ft. (10.60 m) |
DYNZ-126-0 |
Harness |
Length:
6 Ft. (1.80 m) |
DYNZ-126-1 |
Harness |
Length: 25
Ft. (7.60 m) |
DYNZ-126-2 |
Harness |
Length: 9
Ft. (2.70 m) |
DYNZ-126-3 |
Harness |
Length: 12
Ft. (3.65 m) |
DYNZ-126-5 |
Harness |
Length: 18
Ft. (5.40 m) |
DYNZ-126-7 |
Harness |
Length: 4
Ft. (1.22 m) |
DYNZ-154-4 |
Harness |
Length:
32.0 Ft. (9.70 m) |
DYNZ-254-1 |
Harness |
Length: 5.90
Ft. (1.8 m) #8 AWG Wire |
DYNZ-254-3 |
Harness |
Length: 15.70
Ft. (4.8 m) #10 AWG Wire |
DYNZ-255-0 |
Five conductor power and feedback leads,
harness |
Length: 16.00
Ft. (4.8 m) #10 AWG Wire |
DYNZ-255-1 |
Five conductor power and feedback leads
harness |
Length: 5.00
Ft. (1.5 m) #10 AWG Wire |
DYNK-3088 |
Power Flow Actuator Harness |
6.0 Ft. Power lead harness for Power Flow
Throttle Body. |
DYNK-3088-1 |
Power Flow Actuator Harness |
6.0 Ft. Potentiometer harness for Power Flow
Throttle Body with position feedback. |
Kits |
|
|
DYNK-10206 |
Installation kits |
GENERAL PURPOSE KIT FOR DYNA-8000 GOVERNOR. NO BRACKET IN KIT. |
DYNK-10249 |
Installation kits |
GENERAL PURPOSE KIT FOR DYNA-2000/2500 LINEAR
GOVERNOR. |
DYNK-10252 |
Kits |
General Purpose Kit for DYNA 8400. |
DYNK-10304 |
Installation kits |
Cummins "B" Series, 4 & 6
cylinder, CAV-DPA pump, DYNA 2500 (See application bulletin #198) |
DYNK-10337 |
Installation kits |
General Purpose Kit: Linear less MPU |
DYNK-10350 |
Installation kits |
Detroit Diesel 6, 8, 12V71 & 6, 8V92,
using DYNA 8000 actuator. (See application
bulletin #244) |
DYNK-10352 |
Installation kits |
Detroit Diesel 8V149, 12V149 & 16V149,
using DYNA 8400 actuator. (See application bulletin #246) |
DYNK-10355 |
Installation kits |
Detroit Diesel 16V71, 12V92 & 16V92, using
DYNA 8200 actuator. (See application bulletin
#251) |
DYNK-10385 |
Installation kits |
Deutz BFGM1012 & 1013 (See application
bulletin #277) |
DYNK-10388 |
Installation kit |
Zexel p-type fuel pump Direct on rack
installation (bulletin 278) |
DYNK-10393 |
Installation kits |
Cummins "C" Bosch P3000
"A" pump (See application bulletin #281) |
DYNK-10398 |
Installation kit |
John Deere throttle lever tie down kit for
6101 & 6081 (bulletin 285) |
DYNK-10399 |
Installation kits |
John Deere 6081 using DYNA 2500 (See
application bulletin #285) |
DYNK-10400 |
Installation kits |
Cummins "B" Bosch Inline P300 pump
(See application bulletin #286) |
Levers |
|
|
DYNC-174 |
Levers |
For use with 0.375" (3/8") rod end
bearings Overall length: 5.18" (131.5 mm)
Holes for Adjustment: 5 Holes |
DYNC-174-1 |
Levers |
For use with 0.312" (5/16") rod end
bearings. Overall Length: 5.18" (131.5 mm)
Holes for Adjustment: 5 Holes |
DYNC-174-4 |
Levers |
For use with 0.250" (1/4") rod end
bearings Overall Length: 3.25" (82.55 mm)
Hole for Adjustment: 1 Hole |
DYNC-174-5 |
Levers |
For use with 0.250" (1/4") rod end
bearings. Overall Length: 5.18" (131.5 mm)
Hole for Adjustment: 1 Hole |
DYNC-174-6 |
Levers |
For use with 0.312" (5/16") rod end
bearings Overall Length: 2.8" (71.1 mm)
Holes for Adjustment: 2 Holes |
DYNC-174-8 |
Levers |
For use with 0.312" (5/16") rod end
bearings Overall Length: 2.08" (52.8 mm)
Hole for Adjustment: 1 Hole |
DYNC-182 |
Levers |
For use with 0.25" (1/4") rod end
bearings Overall Length: 5.0" (127.0 mm)
Holes for Adjustment: 5 Holes |
DYNC-182-001 |
Levers |
For use with 0.25" (1/4") rod end
bearings Overall Length: 1.9" (48.2 mm)
Hole for Adjustment: 1 Hole |
DYNC-182-002 |
Levers |
For use with 0.25" (1/4") rod end
bearings Overall Length: 2.67" (67.80 mm)
Holes for Adjustment: 2 Holes |
DYNC-182-003 |
Levers |
For use with 0.25" (1/4") rod end
bearings Overall Length: 3.4" (87.6 mm)
Holes for Adjustment: 3 Holes |
DYNC-182-008 |
Levers |
For use with 0.312" (5/16") rod end
bearings Overall Length: 4.9" (127.0 mm)
Holes for Adjustment: 5 Holes |
DYNC-182-012 |
Levers |
For use with 0.193" (#10/32) rod end
bearings Overall Length: 2.67" (67.80 mm)
Holes for Adjustment: 5 Holes |
DYNC-201 |
Levers |
For use with 0.312" (5/16") rod end
bearings. Overall Length: 5.0" (127.0 mm)
Holes for Adjustment: 5 Holes |
DYNC-208 |
Levers |
For use with +1 Actuator and Cummins kits |
DYNC-607 |
Levers |
For use with +1 Actuator used on small
horsepower engine applications and 0.165" (#10/32) rod end bearings. |
DYNZ-132-1 |
Levers |
For use with +1 Actuator on Deutz FL 912
Engine |
DYNZ-132-2 |
Levers |
For use with +1 Actuator on Deutz FL 413 FR
Engine |
Metric Threads |
|
|
DYNZ-156-1 |
Metric Threads |
M6: For use with +1 Actuator |
DYNZ-156-2 |
Metric Threads |
M8: For
use with +6 Actuator |
Pickup |
|
|
Magnetic Pickups are the communication link
between your engine and our electronic governor control. The MPU is installed next to a
drive shaft gear made of a material which reacts to a magnetic field. As each gear tooth
passes the MPU, the gear interrupts the MPU's magnetic field and this produces an ac
signal which corresponds to engine speed. This ac signal is wired into the magnetic pickup
inputs on the controller.
SPECIFICATIONS
Thread Sizes: SAE (5/8 - 18 - UNF - 2A); SAE (3/4 - 16); Metric = (M - 16 x 1.5 g)
Insertion Depth: Various lengths
Connection: Open leads - MS connectors |
DYNT-10100 |
Magnetic Pickup |
|
DYNT-10200 |
Magnetic Pickup |
|
DYNT-10300 |
Magnetic Pickup |
|
DYNT-10400 |
Magnetic Pickup |
|
DYNT-10500 |
Magnetic Pickup |
|
DYNT-10600 |
Magnetic Pickup |
|
DYNT-11100 |
Magnetic Pickup |
|
DYNT-11200 |
Magnetic Pickup |
|
DYNT-11300 |
Magnetic Pickup |
|
DYNT-11400 |
Magnetic Pickup |
|
DYNT-11500 |
Magnetic Pickup |
|
DYNT-11600 |
Magnetic Pickup |
|
DYNT-13200 |
Magnetic Pickup |
|
DYNT-13300 |
Magnetic Pickup |
|
DYNT-15200 |
Magnetic Pickup |
|
DYNT-15400 |
Magnetic Pickup |
|
DYNT-15600 |
Magnetic Pickup |
|
DYNT-17100 |
Magnetic Pickup |
|
DYNT-17150 |
Magnetic Pickup |
|
DYNT-17200 |
Magnetic Pickup |
|
DYNT-17400 |
Magnetic Pickup |
|
DYNT-19200 |
Magnetic Pickup |
|
Pickup Fittings |
|
|
DYNC-600-1 |
Magnetic Pickup Fittings |
3/4-16 to 5/8-18 |
DYNC-600-2 |
Magnetic Pickup Fittings |
3/4-16 to 3/8-24 |
DYNC-600-3 |
Magnetic Pickup Fittings |
5/8-18 to 3/8-24 |
DYNC-600-4 |
Magnetic Pickup Fittings |
M16 to 3/8-24 |
Remote Speed |
|
|
DYNS-1 |
Remote Speed controller |
Lock for DYNS-10000 Remote Speed Setting
Potentiometer |
DYNS-10 |
Remote Speed controller |
Knob 10 turn, for remote speed setting
potentiometer |
DYNS-10000 |
Remote Speed controller |
Remote Speed Potentiometer (5K ohms, 10 turn)
with 499 K ohm Resistor and Lock Nut for Potentiometer |
DYNS-10000-1 |
Remote Speed controller |
Remote Speed Potentiometer (5K ohms, 10 turn)
with 121K ohm Resistor and Lock Nut for Potentiometer. |
Rod End Bearings |
|
|
AKKH-175 |
Rod End Bearings |
#10/32 Bore with 10/32 UNF Thread |
DYNC-637 |
Rod End Bearings |
#10/32 Includes Ball Joint |
DYNK-134-1 |
Rod End Bearings |
1/4" Bore with 1/4-28 UNF Thread |
DYNK-134-2 |
Rod End Bearings |
5/16" Bore with 5/16-24 UNF Thread |
DYNK-134-3 |
Rod End Bearings |
3/8" Bore with 5/16-24 UNF Thread |
DYNK-134-5 |
Rod End Bearings |
1/2" Bore with 1/2-20 UNF Thread |
DYNZ-47-1 |
Rod End Bearings |
1/4" Bore with 1/4-28 UNF Thread |
DYNZ-47-2 |
Rod End Bearings |
5/16" Bore with 5/16-24 UNF Thread |
DYNZ-47-3 |
Rod End Bearings |
3/8" Bore with 3/8-24 UNF Thread |
Service Tools |
|
|
DYNK-10379 |
Isolated interface, service tools |
RS232 TO RS485 ISOLATED INTERFACE. Consists of the following parts which may be
purchased separately: |
DYNK-30000 |
Isolated interface, service tools |
Power Supply AC/DC Adaptor |
DYNK-55000 |
Isolated interface, service tools |
RS232 TO RS485 Convertor |
Wire |
|
|
DYNZ-70-1 |
Wire |
5 Conductor Cable containing the following: 3 Conductor Shielded -- 18 AWG Mylar wrap and drain wire for remote speed
potentiometer. 1 common wire -- 18 AWG For ILS, single phase load pulse, etc. 1 Twisted
Pair -- 14 AWG For DC power input. |
DYNZ-70-2 |
Wire |
5 Conductor Cable containingt the following: 3
Conductor Sheilded -- 18 AWG. Mylar wrap and drain wire for remote
speed potentiometer. 1 Twisted Pair -- 14 AWG for DC power input. Temperature Rated to
+105 degrees C |
DYNZ-70-3 |
Wire |
Twisted Wire -- 10 AWG |
DYNZ-70-4 |
Wire |
2 Conductor Twisted Pair -- 14 AWG Temperature Rated to +105 degrees C |
DYNZ-70-5 |
Wire |
2 Conductor Twisted Pair -- 12 AWG Temperature Rated to +105 degrees C |
DYNZ-70-6 |
Wire |
7 Conductor Cable containing the following: 3 Conductor Shielded -- 18 AWG Mylar Wrap and Drain
Wire 2 Conductor -- 18 AWG with foil
shield 1 Common Wire -- 18 AWG 1 Twisted Pair -- 14 AWG Rated 600 volts at -55 to +105 degrees C |
DP132-012-0-00 |
Wire |
Black -- 12 AWG |
DP132-014-0-00 |
Wire |
Black -- 14 AWG |
DP132-014-2-00 |
Wire |
Black/Red -- 14 AWG |
E26-22 |
Wire |
3 Conductor with foil shield -- 18 AWG Temperature Range -20 to +60 degrees C |
E26-25 |
Wire |
3 Conductor with foil shield -- 22 AWG Temperature Range -70 to +150 degrees C |
E26-29 |
Wire |
2 Conductor with foil shield -- 22 AWG Temperature Range -55 to +105 degrees C |
E26-68-008-0-00 |
Wire |
Black -- 8 AWG Single Conductor Bare |
E26-68-208-2-00 |
Wire |
Red -- 8 AWG Stranded Copper Wire |
