APECS DPG Digital Engine Controller Systems
Note: Non-Woodward documents are not under Woodward
engineering control and are provided for historical reference only.
Actuator Compatibility:
DYNA 2000 / DYNA 2500
Power Flow gas valves
DYNA 7000 rotary actuator
DYNA 70025 Stanadyne actuator
DYNA 8000 / DYNA 8200 / DYNA 8400
| Item |
Description |
Product
Sheet |
Tech
Manual |
APECS
DPG-2103 |
The DPG2100 controller has
widespread application for many diesel and gas engine generator sets. This microprocessor
based, digital controller performs across a wide speed range offering extremely fast
engine response to speed or load change and stable isochronous operation.
The controller also features an LED that provides an operating status symbol. Controller
set up is simple with only speed and gain adjustments. The unit is suitable for both panel
and engine mounting and uses a magnetic pickup for speed reference.
The DPG2100 has an internal FAILSAFE that instantly reacts to:
· Interruption of DC power returns actuator to minimum fuel position.
· Loss of speed reference signal cuts power to the actuator for spring return to
minimum fuel position.
LIMITED PRODUCTION. PLEASE USE COMPARABLE 21xx-001 models instead. |
dyna 298 |
dyna 300 |
APECS
DPG-2104 |
dyna 298 |
dyna 300 |
APECS
DPG-2105 |
dyna 298 |
dyna 300 |
APECS
DPG-2101-001 |
The DPG-2100-001 is used primarily to govern
diesel or gas fueled engines of generator sets. This microprocessor based, digital
controller performs across a wide speed range and allows adjustment of Set Speed and Gain
with the built-in user interface.
The COMM port provides access to all other governor settings to allowing adaptation to
each application. Separately programmable Proportional, Integral, and Derivative gains are
provided for tailoring governor response to many engine applications.
Properly tuned, this governor delivers fast engine response to speed or load change while
providing precise stable isochronous operation. Other adjustments include Acceleration and
Deceleration Ramp Rates, Idle Speed Set and Hold Time, and more. The governor’s
internal FAILSAFE reacts instantly to loss of the engine speed signal allowing the
actuator to return to minimum fuel. |
Woodward 36502 |
Woodward 36526 |
APECS
DPG-2145-001 |
The DPG-2145-001 is used primarily to govern
gas fueled engines of generator sets. This microprocessor based, digital controller
performs across a wide speed range and allows adjustment of Set Speed and Gain with the
built-in user interface. The COMM port provides access to all other governor settings to
allowing adaptation to each application. Separately programmable Proportional, Integral,
and Derivative gains are provided for tailoring governor response to many engine
applications. Properly tuned, this governor delivers fast engine response to speed or load
change while providing precise stable isochronous operation. Other adjustments include
Acceleration and Deceleration Ramp Rates, Idle Speed Set and Hold Time, and more. The
governor’s internal FAILSAFE reacts instantly to loss of the engine speed signal
allowing the actuator to return to minimum fuel. 12-PIN MOLEX |
Woodward 36502 |
Woodward 36526 |
APECS
DPG-2146-001 |
The DPG-2146-001 is used primarily to govern
gas fueled engines of generator sets. This microprocessor based, digital controller
performs across a wide speed range and allows adjustment of Set Speed and Gain with the
built-in user interface. The COMM port provides access to all other governor settings to
allowing adaptation to each application. Separately programmable Proportional, Integral,
and Derivative gains are provided for tailoring governor response to many engine
applications. Properly tuned, this governor delivers fast engine response to speed or load
change while providing precise stable isochronous operation. Other adjustments include
Acceleration and Deceleration Ramp Rates, Idle Speed Set and Hold Time, and more. The
governor’s internal FAILSAFE reacts instantly to loss of the engine speed signal
allowing the actuator to return to minimum fuel |
Woodward 36502 |
Woodward 36526 |
APECS
DPG-2155-001 |
The DPG-2155-001 is used primarily to govern
diesel or gas fueled engines of generator sets. This microprocessor based, digital
controller performs across a wide speed range and allows adjustment of Set Speed and Gain
with the built-in user interface. The COMM port provides access to all other governor
settings to allowing adaptation to each application. Separately programmable Proportional,
Integral, and Derivative gains are provided for tailoring governor response to many engine
applications. Properly tuned, this governor delivers fast engine response to speed or load
change while providing precise stable isochronous operation. Other adjustments include
Acceleration and Deceleration Ramp Rates, Idle Speed Set and Hold Time, and more. The
governor’s internal FAILSAFE reacts instantly to loss of the engine speed signal
allowing the actuator to return to minimum fuel. 12-PIN MOLEX |
Woodward 36502 |
Woodward 36526 |
APECS
DPG-2201-001 |
The DPG-2201-001 is used primarily to govern
diesel or gas fueled engines of generator sets. This microprocessor based, digital
controller performs across a wide speed range and allows adjustment of all governor
features through the built-in user interface. Separately programmable Proportional,
Integral, and Derivative gains are provided for tailoring governor response to many engine
applications. Properly tuned, this governor delivers fast engine response to speed or load
change while providing precise stable isochronous operation. Other adjustments include
Acceleration and Deceleration Ramp Rates, Startup and Torque Limits, Idle Speed Set and
Hold Time, and more. This governor can also provide droop speed control with 100 user
selectable droop levels. The governor’s internal FAILSAFE reacts instantly to loss of
the engine speed signal allowing the actuator to return to minimum fuel. |
Woodward 36503 |
Woodward 36523 |
APECS
DPG-2223-001 |
Programmable governor for isochronous
generators with laod sharing capability. The APECS DPG-2223-001 is used primarily to
govern diesel or gas fueled engines of generator sets. In addition to separately
programmable proportional, integral, and derivative gains, adjustments includ accel and
decel ramp rates, startup and torque limits, idle speed set, and hold time. |
|
Woodward 36522 |
APECS
DPG-2302 |
|
dyna 320 |
|
APECS
DPG-2302-001 |
The DPG-2300 controller has widespread
application for diesel and gas off highway applications. This microprocessor based,
digital controller performs across a wide speed range offering adjustable engine response
to speed or load change and stable isochronous operation. The controller provides
isochronous speed control with adjustable startup fuel limit and ramp rate. Separately
programmable proportional, integral, and derivative gains are provided for tailoring
governor response to many engine applications. The LED display shows the parameter number
of the parameter to be selected or the selected parameter's current value. The controller
provides Automatic Calibration of the Remote Speed Input. The DPG-2300 has an internal
FAILSAFE that instantly reacts to loss of speed reference signal allowing the actuator to
return to minimum fuel. |
Woodward 36504 |
Woodward 36527 |
APECS
DPG-2401-001 |
The DPG-2401-001 is used to govern Cummins
engines fitted with PT type fuel pumps. |
dyna332 |
Woodward 36525 |
| |
|
|
|
|
