Woodward DYN +1 +4 +6 +8/16 Electronic Governor Systems

DYNA +1 +4 +8 and +16 Systems

Note: Documents are not under Woodward engineering control and are provided for historical reference only.

DYNA +1 Actuators

Old Item	New Item	Description	Product Sheet	Tech Manual
DYNC-11000-004-0-12	DC11000-004-012	The DYNA Plus 1 governor is a simple, economical, all electric governor for precise isochronous or droop speed control of various sized engines, depending on the type of fuel system used. The actuator is equipped with a non contact feedback transducer making the actuator available for use in positioning systems (test stands, etc.) SPECIFICATIONS Speed Range: 250 - 9500 Hz Input: 2.5 Vrms minimum speed signal Operating Voltage: 12 VDC, 24 VDC, 32 VDC, 48 VDC, 74 VDC or 110 VDC Maximum Stall Current: 12.5 amps @ 12 VDC; 13 amps @ 24 VDC Full Output Travel of Actuator: 45° Maximum Work Output of Actuator: 1.2 ft. lbs. or 1.6 joules Maximum Torque Output of Actuator: 1.4 lb. ft. or 1.9 newton-meters	f-18080 f-18087 f-19427	f-16789
DYNC-11000-004-0-24	DC11000-004-024
DYNC-11000-304-0-24	DC11000-304-024
DYNC-11001-004-0-12	DC11001-004-012
DYNC-11001-004-0-24	DC11001-004-024
DYNC-11001-004-0-24	DC11001-004-024
DYNC-11002-004-0-24	DC11002-004-024
DYNC-11004-004-0-12	DC11004-004-012
DYNC-11004-004-0-24	DC11004-004-024
DYNC-11005-004-0-12	DC11005-004-012
DYNC-11005-004-0-24	DC11005-004-024
DYNC-11006-004-0-12	DC11006-004-012
DYNC-11006-004-0-24	DC11006-004-024
DYNC-11006-304-0-12	DC11006-304-012
DYNC-11006-304-0-24	DC11006-304-024

DYNA +4 Actuator

Old Item	New Item	Description	Product Sheet	Tech Manual
DYNC-14000-001-0-24	DC14000-001-024	The DYNA Plus 4 governor is a simple, economical, all electric governor for precise isochronous or droop speed control of various sized engines, depending on the type of fuel system used. The actuator is equipped with a non contact feedback transducer making the actuator available for use in positioning systems (test stands, etc.) SPECIFICATIONS Speed Range: 250 - 9500 Hz Input: 2.5 Vrms minimum speed signal Operating Voltage: 24 VDC, 32 VDC, 48 VDC, 74 VDC or 110 VDC Maximum Stall Current: 13 amps @ 24 VDC Full Output Travel of Actuator: 45° Maximum Work Output of Actuator: 4.3 ft. lbs. or 5.8 joules Maximum Torque Output of Actuator: 5.4 lb. ft. or 7.3 newton-meters	f-18080 f-18087 f-19427	f-16789

DYNA +6 Actuators

Old Item	New Item	Description	Product Sheet	Tech Manual
DYNC-16000-002-0-24	DC16000-002-024	The DYNA Plus 6 and Explosion Proof Plus 6 governors are simple, economical, all electric governors for precise isochronous or droop speed control of large sized engines, depending on the type of fuel systems used. The actuators are equipped with a non contact feedback transducer making them available for use in positioning systems (test stands, etc.) SPECIFICATIONS Speed Range: 250 - 9500 Hz Input: 2.5 Vrms minimum speed signal Operating Voltage: 24 VDC or 32 VDC Maximum Stall Current: 25 amps @ 24 VDC Actuators: Must specify voltage required Controller: Must specify voltage required Full Output Travel of Actuator: 45° Maximum Work Output of Actuator: 6.0 ft. lbs. or 8.0 joules Maximum Torque Output of Actuator: 7.5 lb. ft. or 10.0 newton-meters	f-18080 f-18087 f-19427	f-16789
DYNC-16001-002-0-24	DC16001-002-024		f-18080 f-18087 f-19427	f-16789

DYNA +8 Actuator

Old Item	New Item	Description	Product Sheet	Tech Manual
DYNC-18000-000-0-24	DC18000-000-024	Through output shaft making available clockwise and counterclockwise shaft rotation.	f-19427 f-18087	f-18571-2

DYNA + Actuator-Mounted Controllers for use with DYNA +1

DYNA + Panel-Mounted Controllers for use with DYNA +1 +4 +6 +8/16

dyn110504.gif (2830 bytes)

DYNA + Actuator-Mounted Controllers Tandem Propulsion,
for use with DYNA +1 +4 +6 +8/16